115-Volt AC Instrument Panel Accessory Power Receptacle Replacement

115-Volt AC Instrument Panel Accessory Power Receptacle Replacement

Removal Procedure

1. Remove the front floor console. Refer to Front Floor Console Replacement (Front Floor Console Replacement).
2. Remove the no. 2 switch hole base.




3. Disengage the two claws (1) and remove the power point socket assembly.

Installation Procedure




1. Engage the 2 claws (1) to install the power point socket assembly.
2. Install the no. 2 switch hole base.
3. Install the front floor console. Refer to Front Floor Console Replacement (Front Floor Console Replacement).