Coolant Reservoir: Service and Repair

Radiator Surge Tank Replacement

Removal Procedure




1. Remove the cap from the radiator surge tank.
2. Remove the 3 bolts (1, 2, 3) and radiator surge tank assembly.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the radiator surge tank assembly with the 3 bolts (1, 2, 3) and tighten to 7.0 Nm (62 lb in).
2. Properly fill the cooling system. Refer to Cooling System Draining and Filling (Service and Repair)
3. Install the radiator surge tank cap.