Rear Compartment Lid Latch

Rear Compartment Lid Latch Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the screws and the luggage compartment lock.
3. Disconnect the electrical connector.
4. Disconnect the lock rod.
5. Disconnect the cable from the lock.

Installation Procedure




1. Connect the cable to the lock.
2. Connect the lock rod.
3. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the luggage compartment lock with the screws and tighten to 6 Nm (53 lb in).
5. Connect the negative battery cable.