With Variable Camshaft Phasing

Camshaft Gear Replacement

Removal Procedure




1. Remove the timing belt. Refer to Timing Belt Replacement (Service and Repair).
2. Remove the camshaft sprocket bolt cap (4).
3. Remove the camshaft sprocket bolts (3).
4. Remove the camshaft sprockets (1, 2).

Installation Procedure





Note: When installing the camshaft sprockets, the timing adjustment procedure must be accomplished. Refer to Timing Belt Replacement .

1. Install the camshaft sprockets (1, 2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the camshaft sprocket bolts (3).

Tighten the camshaft sprocket bolts to 65 Nm (47.9 lb ft).

3. Install the camshaft sprocket bolt caps (4).

Tighten the camshaft sprocket bolt cap to 50 Nm (36.8 lb ft).

4. Install the timing belt. Refer to Timing Belt Replacement (Service and Repair).