System Specifications

Cylinder Head Sub-Assembly Bolt
1st 70 Nm (52 lb ft)
2nd Turn 90 degrees

Cylinder Head Bolt Re-usability

Standard bolt length 141.3 to 142.7 mm (5.563 to 5.618 in)
Maximum bolt length 144.2 mm (5.677 in)

Stud Bolt (Cylinder Head)
Bolt A 5.0 Nm (44 lb in)
Bolt B 5.0 Nm (44 lb in)
Bolt C 9.5 Nm (87 lb in)
Bolt D 9.5 Nm (87 lb in)

Cylinder Head Cover Sub-Assembly Bolt
Bolt A 11 Nm (8 lb ft)
Bolt B 14 Nm (10 lb ft)
Nut 11 Nm (8 lb ft)

INTAKE MANIFOLD

Intake manifold with the 5 bolts (1, 3, 8, 10, 11) and 2 nuts (2, 5) and tighten to 30 Nm (22 lb ft)

CAMSHAFT BEARING CAP BOLT

Intake:

Camshaft Bolt
No.1 30 Nm (22 Ib ft)
Other 9.0 Nm (80 Ib in)

CAMSHAFT PULLEY/GEAR

Camshaft Timing Gear Assembly Bolt 54 Nm (40 lb ft)

EXHAUST MANIFOLD

Exhaust Manifold Converter Sub-Assembly Bolt 37 Nm (27 lb ft)