Rear Window Wiper Motor Replacement
Rear Window Wiper Motor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Remove the rear window wiper arm.
3. Remove the hatchback door lower garnish molding.
4. Remove the bolts and the rear wiper motor.
5. Disconnect the electrical connector.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Connect the electrical connector.
2. Install the rear wiper motor with the bolts.
Tighten the wiper motor bolts to 9 N.m (80 lb in).
3. Install the hatchback door lower garnish molding.
4. Install the rear window wiper arm.
5. Connect the negative battery cable.