FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

C0569



DTC C0569

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach. Initial Inspection and Diagnostic Overview
* Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor

DTC C0569 00

- System Configuration Error No Additional Information

Circuit/System Description

The electronic brake module (EBCM) receives a GMLAN message from each of the network modules. Each module contains its own unique identification (ID) code that must be learned into the EBCMs memory. Once all the IDs have been learned and vehicle speed is 25 mph, or greater, the EBCM continuously compares IDs in the GMLAN message to its learned IDs to determine if all the network modules are present.

Conditions for Running the DTC

The ignition is ON.

Conditions for Setting the DTC

The EBCM has not undergone the programming procedure.

Action Taken When the DTC Sets

The driver information center (DIC) displays the SERVICE ABS warning message.

Conditions for Clearing the DTC

A current DTC will clear when the EBCM has undergone the setup procedure.

Diagnostic Aids

A newly replaced EBCM will set DTC C0569 on its initial ignition ON cycle.

Reference Information

Schematic Reference

Antilock Brake System Schematics

Connector End View Reference

Antilock Brake System Connector End Views

Description and Operation

ABS Description and Operation

Electrical Information Reference

* Circuit Testing
* Connector Repairs
* Testing for Intermittent Conditions and Poor Connections
* Wiring Repairs

Scan Tool Reference

Scan Tool Data List for EBCM

Circuit/System Verification

This DTC is for information only. As an aid to the technician, this DTC indicates that there are no problems in the ABS/ETS/VSES system

Repair Instructions

Perform the Diagnostic System Check - Vehicle After completing the diagnostic procedure. Initial Inspection and Diagnostic Overview

* Refer to Programing and Relearning Programming and Relearning

* Vacuum Brake Booster Replacement (w/o JL4) Vacuum Brake Booster Replacement (w/JL4)

Repair Verification

Diagnostic Repair Verification