Power Steering Pump Bracket Replacement

Power Steering Pump Bracket Replacement
Removal Procedure





1. Remove the power steering pump (1) from the mounting bracket (2).
2. Remove the 2 bolts (3,4) from the bracket.
3. Remove the bracket from the cylinder head.

Installation Procedure





1. Install the mounting bracket (2) to the cylinder head.

2. Notice:

Install the 2 bolts (3,4) to the bracket.
Tighten the 2 bolts to 28 Nm (21 ft. lbs.).
3. Install the power steering pump to the bracket.