Child Seat Tether Attachment: Service and Repair

CHILD RESTRAINT TETHER ANCHOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.




2. Remove the fasteners (1) from the child tether anchors (2).
3. Remove the child tether anchors (2) and washer (3) from the vehicle.

INSTALLATION PROCEDURE




1. Install the child tether anchors (2) and washer (3) to the vehicle.
2. Install the child tether anchor fasteners (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fastener to 20 N.m (15 lb ft).

3. Install the rear shelf trim panel.