Speaker Replacement - Rear Quarter

SPEAKER REPLACEMENT - REAR QUARTER

REMOVAL PROCEDURE
1. Ensure that the radio is turned off.
2. Remove the rear quarter trim panel.




3. Remove the speaker retaining screws (1).
4. Pull the speaker away from the quarter panel, then disconnect the speaker electrical connector (2).
5. Remove the speaker from the vehicle.

INSTALLATION PROCEDURE
1. Position the speaker in the vehicle.




2. Connect the speaker electrical connector (2)
3. Install the speaker retaining screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the speaker retaining screws to 2 N.m (18 lb in).

4. Install the rear quarter trim panel.