2 Door

REMOVAL PROCEDURE




1. Open the lift gate (1).
2. Remove the following components from the high mounted stoplamp housing (2):
^ The 2 screws (3)
^ The high mounted stoplamp cover (4)




3. Remove the high mounted stoplamp bulb (1) from the stoplamp cover (3), if necessary.




4. Remove the following components from the liftgate:
^ The 2 screws
^ The high mounted stoplamp housing

INSTALLATION PROCEDURE




1. Install the high mounted stoplamp housing to the Lift gate. Secure the housing with the 2 screws.




2. Install the high mounted stoplamp bulb (1) to the stoplamp cover (3), if removed.




3. Install the high mounted stoplamp cover (4) to the stoplamp housing (2). Secure the cover with the 2 screws (3).
4. Close the liftgate