Body Side Rear Trim Panel Replacement (4-Door)

Body Side Rear Trim Panel Replacement (4-Door)

Removal Procedure




1. Lower the rear seat.
2. Remove the 3 plastic retaining clips that secure the following components to the vehicle:

* The rear back seat side trim (4)
* The front partition trim (3)

3. Unclip the partition (3). Position the partition (3) away from the rear back seat side trim (4).
4. Unclip the rear seat bottom. Position the rear seat bottom away from the rear back seat side trim (4).
5. Unclip the rear carpet. Position the rear carpet away from the rear back seat side trim (4).
6. Remove the plastic retaining clip. Unclip the rear back seat side trim (4) from the vehicle.

Installation Procedure




1. Reposition the rear back seat side trim (4) into the vehicle. Snap the trim (4) into place.
2. Install the plastic retaining clip. Reposition the carpet over the plastic retaining clip.
3. Clip the rear seat into place.
4. Install the 3 plastic retaining clips that secure the following components to the vehicle:

* The rear back seat side trim (4)
* The front partition trim (3)

5. Reposition the partition trim (3). Secure the trim with a plastic retaining clip.
6. Reposition the rear seat.