Drink Holders: Service and Repair

Cupholder Replacement

Removal Procedure




1. Remove the console. Refer to Console Replacement (Service and Repair).
2. Remove the IP center trim bezel (4). Refer to Instrument Panel Center Trim Panel Replacement. Instrument Panel (IP) - Trim Panel Replacement - Center
3. Remove the cup holder (8) from the instrument panel by removing 2 screws.

Installation Procedure




1. Install the cup holder (8) to the instrument panel. Secure the cup holder with the 2 screws.
2. Install the IP center trim bezel (4) to the instrument panel. Refer to Instrument Panel Center Trim Panel Replacement. Instrument Panel (IP) - Trim Panel Replacement - Center
3. Install the console. Refer to Console Replacement (Service and Repair).