Wheel Alignment Specifications

Wheel Alignment Specifications (Allowed / Preferred)
Front Camber -0.5-1.5°
Preferred +0.5°
Cross-Camber (reference only) 0.0°
Rear Camber -0.1-1.0°
Preferred 0.0°
Cross-Camber (reference only) 0.0°
Front Caster (non-adjustable) 1.0-5.0°
Preferred (reference only) 3.0°
Cross-Caster (reference only) 0.0°

Toe: Front 0.0-0.16°
Preferred +0.08°

Total Toe: Front 0.0-0.32°
Preferred (reference only) +0.16°

Toe: Rear 0.15-0.3°
Preferred +0.22°

Total Toe: Rear 0.3-0.6°
Preferred (reference only) +0.45°


Inside Turning Angle 38°
Outside Turning Angle 32°
Front Side Slip Limit Less Than 3 mm/m (0.118 inch/1 inch)
Rear Side Slip Limit 1-5 mm/m (0.39-1.97 inch/1 inch)