Pressure Cycling Switch Replacement

Pressure Cycling Switch Replacement

REMOVAL PROCEDURE
1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner. Set the air cleaner aside.
3. Disconnect the Air Conditioning (A/C) refrigerant pressure switch electrical connector.
4. Remove the A/C refrigerant pressure switch (1) from the evaporator inlet (4) pipe.

INSTALLATION PROCEDURE
1. Install the A/C refrigerant pressure switch (1) to the evaporator inlet (4) pipe.
2. Connect the A/C refrigerant pressure switch electrical connector.
3. Install the air cleaner to the vehicle.
4. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
5. Operate the A/C system and inspect for refrigerant leaks. Refer to Leak Testing.