2-Door

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the 2 screws which secure the tail lamp (5).
3. Pull the tail lamp (5) away from the rear end panel in order to gain access to the sockets of the stop/tail lamp bulb (3).
4. Remove the stop/tail lamp sockets from the tail lamp (5).
5. Remove the stop/tail lamp bulb (3) from the socket.

INSTALLATION PROCEDURE
1. Install the stop/tail lamp bulb (3) to the stop/tail lamp socket.
2. Install the stop/tail lamp socket to the tail lamp (5).
3. Install the tail lamp (5) to the rear end panel. Secure the lamp with the 2 screws.
4. Connect the negative battery cable.