4-Door

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Open the rear compartment lid.
3. Reposition the rear compartment side trim in order to gain access to the tail lamp retaining nut.
4. Remove the 1 nut which secures the tail lamp (1).
5. Remove the 2 screws which secure the tail lamp (1).
6. Pull the tail lamp (1) away from the rear end panel in order to gain access to the bulb sockets.
7. Remove the bulb sockets from the tail lamp (1).
8. Remove the tail lamp (1) from the vehicle.

INSTALLATION PROCEDURE
1. Install the bulb sockets to the tail lamp (1).
2. Install the tail lamp (1) to the vehicle. Secure the lamp with 2 screws and the retaining nut.
3. Position the rear compartment side trim back to it's original position.
4. Close the rear compartment lid.
5. Connect the negative battery cable.