Dimmer Switch Operation

DIMMER SWITCH OPERATION
The light/dimmer/turn signal combination switch lever is located on the left side of the steering column. The light/dimmer/turn signal combination switch lever controls the operation of the following headlamp operations:
^ Low beam
^ High beam

With the headlamps activated, push the lever forward into the detent position in order to change the headlamps from low beam to high beam operation. Pull the lever back to the center position in order to return the headlamps from high beam operation to low beam operation.

Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR for combination switch replacement procedures.

FLASH-TO-PASS FEATURE
Pull the lever rearward in order to illuminate the high beam headlamps when the lighting system is in either of the following positions:
^ OFF
^ Parking lamps setting
^ Low beam headlamp setting