Instrument Panel Cluster (IPC) - Printed Circuit Replacement

REMOVAL PROCEDURE
1. Remove the instrument cluster from the instrument panel.

IMPORTANT: Remember the location of the bulb sockets for proper installation.

2. Remove all of the bulb sockets from the back of the cluster assembly.
3. Remove the screws (1, 2, 3, 4) from the back of the instrument cluster assembly.
4. Remove the printed circuit from the back of the instrument cluster assembly.

INSTALLATION PROCEDURE
1. Install the printed circuit to the back of the instrument cluster assembly. Secure the printed circuit with all of the gauge screws (1, 2, 3, 4).
2. Install all of the bulb sockets to the back of the instrument cluster assembly.
3. Install the instrument cluster to the instrument panel.