ON/VOL

Set the ignition switch to the ACC or ON positions in order to operate the radio. When the ignition switch is in the ACC or ON positions and the radio is turned OFF, the time will display. All controls will deactivate, except those controls required to set the clock. Refer to Clock Operation. Clock Operation

When the ignition is in the OFF position, you can display the time for approximately 5 seconds by pressing the RECALL button.

Turning the knob clockwise, past the detent will turn ON the radio. Turning the knob further will increase the volume. In order to decrease the volume, turn the knob counterclockwise. Turning the knob past the detent will turn the radio OFF.