Clock Operation

The clock function of this radio does not have a memory function. If power to the radio is interrupted, you will have to reset the clock.

Setting the Clock
In order to set the clock, the ignition switch must be in the ACC or the ON position. The radio may be either ON or OFF.

In order to set the hour, perform the following steps:
1. Press and hold the RECALL button (TIMESET).
2. At the same time, press and hold the left end of the TUNE (HR) button.
3. Release the button when the correct hour appears. In order to set the minutes, perform the following steps:
1. Press and hold the RECALL button (TIMESET).
2. At the same time, press and hold the right end of the TUNE (MIN) button.
3. Release the button when the correct minute appears.