Cylinder Block
| Cylinder Bore Diameter | 3.780 +/- 0.0003 |
| Out of Round (Max.) | 0.003 |
| Taper (Max.) | 0.002 |
| Inside, Main Cap Bolts Bolts must be tightened in the sequence of: 1.) Inside Main Cap Bolts 2.) Outside Main (Windage Tray) Bolts 3.) Tie (Horizontal) Bolts | 15 + 1/4 turn |
| Outside Main (Windage Tray) Bolts Bolts must be tightened in the sequence of: 1.) Inside Main Cap Bolts 2.) Outside Main (Windage Tray) Bolts 3.) Tie (Horizontal) Bolts | 20 + 1/4 turn |
| Tie (Horizontal) Bolts Bolts must be tightened in the sequence of: 1.) Inside Main Cap Bolts 2.) Outside Main (Windage Tray) Bolts 3.) Tie (Horizontal) Bolts | 250 |