Crankshaft Main Bearing

BEARING FOR SERVICE:
STD. 0.025 mm (0.001 inch)
Oversize 0.051 mm (0.002 inch)
Oversize 0.0254 mm (0.010 inch)
Oversize 0.275 mm (0.011 inch)
Oversize 0.300 mm (0.012 inch)

TORQUE:
M 10 Tie Bolts 54 Nm (40 ft. lbs.)
M 11 Cap Bolts 41 Nm (30 ft. lbs.) Plus 1/4 Turn