Fuel Pressure Regulator: Service and Repair

Fig. 15 Fuel Pressure Regulator:

Fig. 16 Fuel Pressure Regulator Removal:

NOTE: The fuel pressure regulator is part of the fuel pump module (Fig. 15). Remove the fuel pump module from the fuel tank for to access the fuel pressure regulator.


REMOVAL
1. Spread tangs on pressure regulator retainer (Fig. 15).
2. Pry fuel pressure regulator out of housing (Fig. 16).
3. Ensure both upper and lower 0-rings were removed with regulator.

Fig. 17 Fuel Pressure Regulator O-rings:

INSTALLATION
1. Lightly lubricate the 0-rings with engine oil and place them into opening in pump module (Fig. 17).
2. Push regulator into opening in pump module.
3. Fold tangs on regulator retainer over tabs on housing.