Sunroof / Moonroof Track: Service and Repair

NOTE: The numbered call-outs in the following service procedures refer the numbered parts found in the exploded view diagram.

SUNROOF GUIDE AND MECHANISM ASSEMBLY
Removal
1. Remove sunroof glass panel (4). Refer to procedure in Sunroof/Service and Repair.
2. Remove front locator (7 or 8).
3. Disengage cable from mechanism (9).
4. Remove screws holding sunroof guide (5) and mechanism (9) assembly to sunroof module.
5. Lift assembly from module.
6. Rotate assembly to disengage wind deflector (13) from assembly

Installation
1. Engage wind deflector (13) into guide (5) and mechanism (9) assembly
2. Position assembly onto module and install screws holding assembly to sunroof module.
3. Engage drive cable to mechanism.
4. Install front locator (7 or 8). It may ease installation to move sunroof mechanism slightly rearward.
5. Install sunroof glass panel. Refer to procedure found in Sunroof/Service and Repair.