System Specifications
Torque<ag211018-011>
| Automatic Seat Belt Guide Ring | 12-19 |
| Ball Joint To Knuckle | 43-52 |
| Bearing Retainer | 12-15 |
| Bellhousing Cover To Engine | 7-9 |
| Clamp To Body | 3-4 |
| Converter Housing | 14-16 |
| Drain Plug | 22-25 |
| Driveplate To Converter | 34-38 |
| End Clutch Cover | 5-6 |
| Hose Bracket | 2-4 |
| Inhibitor Switch | 7-9 |
| Lever Assembly To Bracket Assembly | 10-14 |
| Lock Plate | 26-32 |
| Manual Control Lever Nut | 13-15 |
| Manual Control Shaft Setscrew | 6-7 |
| One-Way Clutch Outer Race | 18-25 |
| Pressure Check Plug | 6-7 |
| Pulse Generator | 7-9 |
| Pump Housing To Reaction Shaft Support | 7-9 |
| Selector Lever Assembly | 7-10 |
| Shift Lock Cable To Selector Lever Assembly | 3-4 |
| Speedometer Sleeve Locking Plate | 2-4 |
| Sprag Rod Support | 15-19 |
| Tie Rod End To Knuckle | 17-25 |
| Transaxle Control Cable Adjusting Nut | 7-10 |
| Transaxle Control Cable To Body | 7-10 |
| Transaxle Mount Bracket To Transaxle | 43-58 |
| Transfer Locknut | 145-166 |