Tire Pressure Monitor (TPM) - Reset (Calibrate)
TIRE PRESSURE MONITOR (TPM) RESET PROCEDUREUSING THE DRIVER INFORMATION CENTER (DIC)
1. Set all tire pressures to manufacturer's specifications.
2. Turn ON the ignition with the engine OFF.
3. Press the SELECT right arrow button until "GAGE" is displayed.
4. Press the SELECT down arrow button until "TIRE PRESSURE" is displayed.
5. Press and hold the RESET button until "TIRE PRESSURE RESET" is displayed.
6. Release the RESET button and "TIRE PRESSURE NORMAL" is displayed.
7. Use the scan tool in order to clear the TPM DTC.
USING THE SCAN TOOL
1. Set all tire pressures to manufacturer's specification.
2. Install the scan tool.
3. Turn ON the ignition with the engine OFF.
4. With the scan tool, select Special Functions.
5. Select Tire Pressure Reset
6. Press the Reset soft key, "TIRE PRESSURE NORMAL" is displayed on the DIC.
7. Use the scan tool in order to clear the TPM DTC.