Camshaft Intermediate Drive Shaft Replacement
Camshaft Intermediate Drive Shaft ReplacementRemoval Procedure
1. Remove the camshaft intermediate drive shaft sprocket.
Important: The camshaft intermediate drive shaft should not be removed unless wear is evident.
2. Remove the camshaft intermediate drive shaft retaining bolts.
3. Remove the camshaft intermediate drive shaft (1) from the engine.
Installation Procedure
1. Position the camshaft intermediate drive shaft (1) to the engine, aligning the bolt holes.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the camshaft intermediate drive shaft retaining bolts.
^ Tighten the camshaft intermediate drive shaft retaining bolts to 10 Nm (89 inch lbs.).
3. Install the camshaft intermediate drive shaft sprocket.