Weatherstrip Replacement - Rear Door Window

Weatherstrip Replacement - Rear Door Window

Removal Procedure

1. Lower the window all the way down.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair
3. Remove the door module.
4. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
5. Remove the window inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (Service and Repair) .
6. Remove the window outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Rear Door Window Belt Outer Sealing Strip Replacement) .
7. Remove the window. Refer to Window Replacement - Rear Door (Service and Repair) .




8. Remove the rear door window weatherstrip fasteners.
9. Grasp the lower front edge of the window weatherstrip.
10. Pull the weatherstrip out of the door frame.
11. Remove the fastener from the run channel.
12. Slide the window weatherstrip forward until it clears the door frame.
13. Remove the weatherstrip.



Installation Procedure





1. Position the rear door stationary window and the weatherstrip into the door frame.
2. Install and fully seat the upper rear corner of the weatherstrip into the upper auxiliary molding and over the pinch-weld flange.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the window weatherstrip fastener.

Tighten the fastener to 6 N.m (53 lb in).

4. Position the remainder of the window weatherstrip into the door frame.
5. Install the window. Refer to Window Replacement - Rear Door (Service and Repair) .
6. Install the window outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Rear Door Window Belt Outer Sealing Strip Replacement) .
7. Install the window inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (Service and Repair) .
8. Install the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
9. Install the door module.
10. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair