Power Mirror Switch: Service and Repair

POWER MIRROR SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the lower pull cup from the door trim panel.
2. With a flat-bladed tool, push in and lift up to disengage the retaining clips for the accessory switch plate.
3. Release the inside retaining tabs for the power mirror switch.
4. Press the power mirror switch out of the switch plate.

INSTALLATION PROCEDURE




1. Install the power mirror switch to the switch plate.
2. Press the power mirror switch into the bezel until fully seated.
3. Install the switch plate to the door trim panel. Press the switch plate into the trim panel until the retaining clips are fully engaged.
4. Install the lower pull cup to the door trim panel.