Connecting Rod, Engine

Connecting Rods
Connecting Rod Material Forged Powdered Metal
Bearing Material Aluminum
Clearance Between Bearing and Crankshaft
New Limits 0.0009-0.002 inch
Worn Limits (Not Over) 0.0025 inch
Lower End Diameter without Bearing 2.328-2.329 inch
Piston Pin Bore Diameter without Bushing 0.923-0.925 inch
Center to Center Length 6.039 inch
Side Clearance on Crankshaft 0.004-0.013 inch

Connecting Rod Bolt
First Pass 22 ft. lbs.
Second Pass Back to zero
Third Pass 18 ft. lbs.
Final Pass +110 degrees