Turn Signal Switch Housing - Disassemble - Aurora

Turn Signal Switch Housing - Disassemble - Off Vehicle (Aurora)

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the inflatable restraint steering wheel module.
2. Remove the upper tilt head components.





3. If necessary, disconnect the connector from the windshield wiper and washer switch assembly.
4. Remove the windshield wiper and washer switch assembly in the following way:
4.1. Press on the locking tabs of the windshield wiper and washer switch assembly.
4.2. Pull the windshield wiper and washer switch assembly out of the turn signal switch housing.





5. Remove the 2 pan head tapping screws (1).
6. Remove the turn signal switch housing (2).