Programming Features With the Tech 2

To enter programming with the Tech 2, perform the following actions:
1. Install the scan tool.
2. Turn ON the ignition with the engine OFF.
3. Select the correct vehicle and model year.
4. Select Body.
5. Select Personalization.

Automatic Door Locks
Continue with the following steps in order to program the automatic door locks:
1. Select Set Options.
2. Select Driver #1 Automatic Door Lock Mode or Driver #2 Automatic Door Lock Mode.
3. Highlight the desired mode from the following choices,refer to Automatic Door Locks for mode descriptions:
^ Mode 0
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
^ Mode 5
4. Press the ENTER button to select a mode. An asterisk appears beside the current mode. You must turn the current mode OFF before you can turn another one ON.
5. Exit from the menu.

Delayed Locking
Continue with the following steps in order to program the delayed locking feature:
1. Select Set Options.
2. Select Driver #1 Delayed Locking or Driver #2 Delayed Locking.
3. Highlight Delay Locking and press the ENTER button to turn the selection ON or OFF. An asterisk appears when the feature is ON.

Driver ID:
Continue with the following steps in order to enter a new driver ID:
1. Select Driver Information Center.
2. Select Driver #1 or Driver #2.
3. Select Driver #1 Name or Driver #2 Name (depending on your previous choice).
4. Spell the ID with the Tech 2 keys.
5. Exit from the menu.

Continue with the following steps in order to turn the driver ID on or off:
1. Select Set Options.
2. Select Driver #1 ID Displayed or Driver #2 ID Displayed.
3. Highlight Driver #1 ID Display or Driver #2 ID Display (depending on your previous choice) and press the ENTER button to turn the selection ON or OFF. An asterisk appears when the feature is turned ON.

Memory Seats
Continue with the following steps in order to program the memory seat options:
1. Select Set Options.
2. Select Driver #1 Memory Recall or Driver #2 Memory Recall.
3. Select one of the following options:
^ Remote Entry Recall Driver Seat
^ Recall Exit on RKE Unlock
4. Press ENTER to turn the option ON or OFF. An asterisk appears when the feature is turned ON.

Parallel Park Assist
Continue with the following steps in order to program the parallel park assist feature:
1. Select Set Options
2. Select Driver #1 Curb View or Driver #2 Curb View.
3. Highlight Parallel Park Assist and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

Passenger Window Lock-Out
Continue with the following steps in order to program the passenger window lock-out feature:
1. Select Set Options.
2. Select Driver #1 Pass. Window Lock-out or Driver #2 Pass. Window Lock-out.
3. Highlight Include Front Pass. Window Lockout and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.

Perimeter Lighting
Continue with the following steps in order to program the perimeter lighting feature:
1. Select Set Options.
2. Select Driver #1 Perimeter Lighting or Driver #2 Perimeter Lighting.
3. Highlight Perimeter Lighting and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

Perimeter Lighting Timer
Continue with the following steps in order to program the perimeter lighting timer:
1. Select Set Options.
2. Select Driver #1 Perimeter Light Timer or Driver #2 Perimeter Light Timer.
3. Select one of the following choices:
^ Delay 5 Seconds
^ Delay 10 Seconds
^ Delay 15 Seconds
^ Delay 20 Seconds
^ Delay 25 Seconds
^ Delay 30 Seconds
4. Press the ENTER button to select a setting. An asterisk appears beside the current setting. You must turn the current setting OFF before you can turn another one ON.

Remote Activation Verification
Continue with the following steps in order to program the remote activation verification feature:
1. Select Set Options.
2. Select Driver #1 Activation Verification or Driver #2 Activation Verification.
3. Highlight the desired mode from the following choices, refer to Remote Activation Verification for mode descriptions:
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
4. Press the ENTER button to turn the mode ON or OFF. An asterisk appears beside the current mode. You must turn the current mode OFF before you can turn another one ON.
5. Exit from the menu.

For more information on the personalization features, refer to one of the following description and operations:
^ Refer to Power Door Locks Description and Operation in Doors for more information about the following features:
- Automatic door locks
- Delayed locking
^ Driver Information Center (DIC) Description and Operation in Instrument Cluster, Gages, and Console for more information about the driver ID.
^ Memory Seats Description and Operation in Seats for more information about the memory seats.
^ Outside Mirror Description and Operation in Doors for more information about the parallel park assist feature.
^ Power Windows Description and Operation in Doors for more information about the passenger window lock-out feature.
^ Exterior Lighting Systems Description and Operation in Lighting Systems for more information about the perimeter lighting feature.
^ keyless Entry System Description and Operation in keyless Entry for more information about the remote activation verification feature.