Vehicle Personalization

CHIME LEVEL ADJUSTMENT

IMPORTANT: On vehicles with option code UM8(Navigation Radio) the chime level volume can be changed through the set up screen under Chime Normal / High or with the Tech 2. On vehicles with out option code UM8(Navigation Radio) the following procedure can be used to change the chime level volume.

In order to adjust the chime level, perform the following steps:
1. Turn the ignition ON.
2. Turn the radio OFF.
3. Press and hold the radio push-button 6 until either LOUD or NORMAL appears on the radio display. The chime sounds three times for each volume change.
4. To toggle the setting, press and hold the radio push-button 6 again.

ADDITIONAL INFORMATION
Refer to in Instrument Panel, Gages, and Console for more information about the chime.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application". RPO Codes