Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT: The cruise control module is mounted to the left strut tower. Service the cruise control module as a complete unit.




1. Remove the cruise control cable from the cruise control module. Refer to Cruise Control Cable Replacement.
2. Disconnect the electrical connector from the cruise control module.




3. Remove the cruise control module to the shock tower nuts.

INSTALLATION PROCEDURE




1. Install the cruise control module on the mounting studs.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the cruise control module to the shock tower nuts.

Tighten
Tighten the nuts to 2 N.m (15 lb in).




3. Connect the electrical connector to the cruise control module.
4. Install the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement.
5. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment.