Intermediate Pipe - Single Pump

REMOVAL PROCEDURE

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

1. Raise the vehicle.
2. Remove the bank 2 intermediate pipe/hose from the AIR pump.
3. Lower the vehicle.
4. Loosen the pinch clamp connecting the bank 2 intermediate pipe/hose to the bank 2 shut-off valve.
5. Remove the bank 2 intermediate pipe/hose.

INSTALLATION PROCEDURE
1. Install the bank 2 intermediate pipe/hose.
2. Install the pinch clamp connecting the bank 2 intermediate pipe/hose to the bank 2 shut-off valve.

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

3. Raise the vehicle.
4. Install the bank 2 intermediate pipe or hose and clamp the pipe hose to the AIR pump.
5. Lower the vehicle.