Instrument Panel/Console Trim Plate - Removal: Overview

File In Section: 08 - Body and Accessories

Bulletin No.: 01-08-49-010

Date: July, 2001

INFORMATION

Subject:
Instrument Panel (IP) Center Trim Plate and Console Trim Plate Removal Procedures

Models:
2001-2002 Oldsmobile Aurora

This bulletin is being issued to emphasize the importance of observing the proper removal/installation procedures to avoid component damage.

Notice:
If the IP Center Trim Plate and Console Trim Plate are not properly removed or installed, damage may occur.

The following information has also been updated within SI2000. If you are using a paper version of this Service Manual, please mark a reference to this bulletin on the affected page.

Please observe the following procedures when removing or installing the IP Center Trim Plate and the Console Trim Plate.





Disclaimer