License Plate Frame: Service and Repair

Front License Plate Mount Trim Cover Replacement

Removal Procedure




1. Remove the fasteners (2) from the underside of the front bumper fascia (1).
2. Pull the bottom of the front license pocket cover outward.
3. Pull the license pocket cover downward to remove.

Installation Procedure

1. Insert the tabs on the top of the license pocket cover into the slots in the license pocket of the fascia.
2. Push the cover upward to engage the tabs.




3. Align the holes in the license pocket cover to the holes in the front bumper fascia.
4. Install the fasteners (2) into the fascia (1).