Ambient Temperature Sensor Replacement

REMOVAL PROCEDURE
1. Disconnect the electrical connector (5) from the ambient air temperature sensor (3).
2. Remove the bolt (4) that retains the ambient air temperature sensor (3) to the upper radiator tie bar (1).
3. Remove the ambient air temperature sensor (3).

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the bolt (4) to retain the ambient air temperature sensor (3) to the upper radiator tie bar (1).

Tighten
Tighten the bolt to 12 N.m (106 lb in).

2. Connect the electrical connector (5) to the sensor (3).