Inside Air Temperature Sensor Replacement

REMOVAL PROCEDURE
1. Remove the knee bolster assembly.
2. Remove the sensor grille.
3. Release the retainer clips though the grille hole.
4. Remove the sensor (3) from the knee bolster.
5. Disconnect the electrical connector (2).
6. Remove the sensor (3) from the aspirator tube.

INSTALLATION PROCEDURE
1. Install the sensor (3) to the aspirator tube.
2. Connect the electrical connector (2).
3. Install the sensor (3) to the knee bolster assembly (6).
4. Install the sensor grille to the knee bolster assembly (6).
5. Install the knee bolster assembly.