Fuel Tank Draining

DRAINING PROCEDURE

CAUTION: Do not drain the fuel into an open container. Never store the fuel in an open container due to the possibility of a fire or an explosion.

NOTE: Do not drain fuel through the fuel tank filler pipe in order to prevent damage the fuel tank filler pipe check-ball.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Remove the fuel sender assembly.
4. Use a hand operated fuel pump device in order to drain the fuel through the fuel sender access panel.
5. Install the fuel sender assembly.
6. Add fuel and tighten the fuel tank filler pipe cap.
7. Reconnect the negative battery cable.
8. Inspect for leaks.
8.1. Turn the ignition switch on for 2 seconds.
8.2. Turn the ignition switch off for 10 seconds.
8.3. Turn the ignition switch on.
8.4. Inspect for fuel leaks.