Glove Box Lamp Switch: Service and Repair

REMOVAL PROCEDURE



1. Open the instrument panel compartment door.
2. Using a small flat-bladed tool depress retainers on instrument panel compartment lamp switch.




3. Remove the instrument panel compartment lamp switch from the instrument panel compartment.
4. Disconnect the electrical connector from the instrument panel compartment lamp switch.
5. Pull the bulb from the instrument panel compartment lamp switch socket.

INSTALLATION PROCEDURE



1. Press bulb into the instrument panel compartment lamp switch socket.
2. Connect the electrical connector to the instrument panel compartment lamp switch.
3. Align the instrument panel compartment lamp switch into instrument panel compartment.
4. Install the instrument panel compartment lamp switch.
Press in until retainers are fully seated.