HVAC System - Manual

REMOVAL PROCEDURE






1. Disconnect the battery negative cable.
2. Remove the right side instrument panel insulator.
3. Unclip the instrument panel harness retainer and position the harness aside.
4. Disconnect the blower motor electrical connector.






5. Disconnect the blower motor cooling hose.
6. Remove the (3) blower motor mounting bolts.
7. Remove the blower motor.

INSTALLATION PROCEDURE






1. Install the blower motor.
2. Install the blower motor bolts.

Tighten
Tighten the blower motor bolts to 20 N.m (14 lb ft).

3. Connect the blower motor cooling hose.






4. Connect the blower motor electrical connector.
5. Install the instrument panel harness into the harness retainer.
6. Install the right side instrument panel insulator.
7. Connect the battery negative cable.