Brake Rotor/Disc: Specifications

NOTE: The content of this article/image reflects the changes called out by TSB: 05-05-23-004.

Front	Normal Thickness	1.27 in.
	Minimum Machining	1.22 in.
	Discard	1.21 in.
	Runout Limit	0.003 in.
	Parallel Variation	0.0005 in.
Rear	Normal Thickness	0.43 in.
	Minimum Machining	0.39 in.
	Discard	0.35 in.
	Runout Limit	0.003 in.
	Parallel Variation	0.0005 in.