Last Door Closed Locking Modes

Power Door Locks Circuit Description:

CHANGING THE LAST DOOR CLOSED LOCKING MODE
Two ways to change the delayed locking mode:
^ Scan tool method. Refer to scan tool user's manual for more information.
^ Door lock switch method.

Perform this procedure to change the last door closed locking mode using the door lock switch method:
1. Close all vehicle doors.
2. Turn the ignition switch on.
3. Step firmly and hold brake pedal.
4. Press and hold unlock on either door lock switch.
5. While holding unlock on the door lock switch, shift the transaxle out PARK then back into PARK.
6. To change the last door closed locking mode shift the transaxle out PARK then back into PARK again.
^ The BCM sounds the chime once when the last door closed locking mode is disabled and twice when enabled.
^ To exit and save the current customization mode: Release the door lock switch when obtaining desired mode.
^ The last door closed locking mode is enabled when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.