Changing the Automatic Door Lock/Unlock Mode

Power Door Lock Circuit Description:

The above table contains the automatic door lock/unlock modes.

Two ways to change the automatic door lock/unlock mode:
^ Scan tool method.
^ Door lock switch method.

Perform the following procedure to change the automatic door lock/unlock mode using the door lock switch method:
1. Close all vehicle doors.
2. Turn the ignition switch on.
3. Step firmly and hold brake pedal.
4. Press and hold lock on either door lock switch. NOTE: All door lock.
5. While holding lock on the door lock switch, shift the transaxle out PARK. The automatic door lock/unlock mode remains in mode 3, and all doors lock.
6. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 3, and all doors unlock.
7. While still holding lock on the door lock switch, shift the transaxle out PARK. The automatic door lock/unlock mode changes to mode 4, and all doors lock.
8. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 4, and only the driver door unlocks.
9. While still holding lock on the door lock switch, shift the transaxle out PARK. The automatic door lock/unlock mode changes to mode 1, and all doors do not lock.
10. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 1, and doors do not unlock.
11. To advance the mode, shift the transaxle out PARK then back into PARK again while holding the door lock switch in the lock position.
12. A transition past mode 4 repeats the sequence starting with mode 1.
13. To exit and save the current customization mode:
Release the door lock switch when obtaining desired mode.
14. Mode 3 is set when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.