Instrument Panel (IP) - Air Deflector/Louver Replacement

REMOVAL PROCEDURE
1. Insert a flat-bladed tool under the left side of the Instrument Panel (IP) air outlet vent. Slide the flat-bladed tool to the right in order to locate the retainers. Grasp the IP air outlet vent and carefully pull rearward in order to release the retainers. Continue working toward the right side of the IP air outlet vent and release the remaining retainers.
2. Remove the right IP air outlet vent panel.

INSTALLATION PROCEDURE
1. Position the IP air outlet vent to the IP.
2. Starting at the bottom of the right instrument panel (IP) air outlet vent panel, grasp the panel and carefully push the panel straight in until the retainers are engaged.