Power Mirror Switch: Service and Repair

REMOVAL PROCEDURE
1. Remove the IP cluster trim plate.
2. Disengage the mirror switch (2) retaining tabs. Remove the switch (2).

INSTALLATION PROCEDURE
1. Align the mirror switch (2) to the cluster trim plate. Push the switch inward in order to fasten the switch to the trim plate.
2. Install the IP cluster trim plate.




REMOVAL PROCEDURE
1. Remove the trim panel (15).
2. Remove the trim panel plate (3).
3. Remove the 2 screws that retain the power mirror switch assembly (2).
4. Remove the power mirror switch assembly (2).

INSTALLATION PROCEDURE
1. Install the power mirror switch assembly (2).
2. Install the 2 screws in order to retain the power mirror switch (2).
3. Install the trim panel plate (3).
4. Install the trim panel (15).