Exhaust Gas Recirculation (EGR) Valve Pipe - Crossover Pipe

REMOVAL PROCEDURE
1. Remove the bolt from throttle body spacer.
2. Remove the bolt at the water pump crossover.
3. Remove the EGR Water Pump Crossover Pipe.





INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the bolt into water pump crossover.

Tighten
Tighten the bolt to 24 N.m (18 lb ft).

2. Install the bolt into the throttle body spacer.

Tighten
Tighten the bolt to 24 N.m (18 lb ft).