Canister Vent Valve: Service and Repair

REMOVAL PROCEDURE
1. Raise the vehicle.
2. Disconnect the EVAP canister vent valve electrical connector.
3. Remove the hose from the EVAP vent valve.
4. Remove the EVAP canister vent valve bolt.
5. Remove the EVAP canister vent valve from the vehicle.

INSTALLATION PROCEDURE
1. Install the hose from the EVAP vent valve.
2. Connect the EVAP canister vent valve electrical connector.
3. Lower the vehicle.

NOTE: Refer to Fastener Notice in General Information.

4. Install the EVAP canister vent valve bolt.

Tighten
Tighten the bolt to 9 N.m (80 lb in).

5. Lower the vehicle.